U.S. Forest Projects (June 25, 2015) - Volume and Biomass Equations for Forest Offset Projects in Alaska, California, Oregon, and Washington
- Compliance Offset Program
- Cap-and-Trade Program
- ARB Offset Credit Issuance
- Compliance Offset Protocols
- Forms
- Guidance
- Invalidation
- Offset Project Operators
- Offset Project Registries
- Offset Protocol Task Force
- Requirements for Tribes
- Verification
- Direct Environmental Benefits in the State (DEBS)
- Early Action Offset Credits
- Sector-Based Offset Credits
Offset Project Operators with projects located in Alaska, California, Oregon, and Washington must estimate and convert biomass to tons of CO2e on a per acre basis, within the boundary of an offset project. To accomplish this, ARB has approved the use of biomass equations generated from the United States Forest Service Forest Inventory and Analysis (FIA) National Program to estimate biomass. These equations are the same equations used to generate the Common Practice estimate for each Assessment Area. Offset Project Operators must use these same equations when modeling growth and yield for their projects. The form of the equations varies by region.
Volume and biomass estimates for projects in Alaska, California, Oregon, and Washington are determined using regional equations (USFS, Region 1). These equations estimate volume and biomass in the various components of the above-ground portion of the tree, including the stump, the bole, the top branches, and leaves. The Cairns equation (Cairns, Brown, Helmer& Baumgardner, 1997) must be used to calculate CO2e in the below-ground portion of the trees.
If your project is not located in Alaska, California, Oregon, and Washington, you must use the volume models and associated coefficients found in Woodall et al (2011) along with the Component Ratio Method to estimate biomass. See Volume and Biomass Equations for Forest Offset Projects in All States Except Alaska, California, Oregon, and Washington.
Instructions
Steps:
- Identify the Supersection your project is located in from the Supersection Maps in Table 1 on the Compliance Offset Protocol U.S. Forest Projects (June 25, 2015) webpage.
- Use the appropriate volume equation identified in the document Volumetric Equations for California, Oregon, and Washington (September 19, 2014)1 for each tree species in your project.
- Use the appropriate biomass equation identified in the document Biomass Equations for California, Oregon, and Washington (September 19, 2014)2 for California, Oregon, and Washington projects. Use the appropriate biomass equations identified in the document Alaska Biomass Equations (November 5, 2002) "
[1] Reference: Volume Estimation for the PNW-FIA Integrated Database; U.S. Department of Agriculture, Forest Service, Pacific Northwest Research Station.
[2] Reference: Regional Biomass Equations Used by FIA to Estimate Bole, Bark, and Branches; U.S. Department of Agriculture, Forest Service, Pacific Northwest Research Station.
For questions or comments regarding the U.S. Forest Protocol, contact Barbara Bamberger at 916-324-2303.