Assist Phase II Enhanced Vapor Recovery System VR-201 Revision AE

Contact

Assist Phase II Vapor Recovery System - (Renewed November 30, 2023)

  • Signed Executive Order VR-201-AE

Until documents have been posted, please contact vapor@arb.ca.gov for electronic versions

Superseded

Assist Phase II Enhanced Vapor Recovery System - Without ISD

For questions regarding associated Exhibits, IOMs, and letters listed below, please email vapor@arb.ca.gov for current versions:

Legal

Legal Document

Exhibit 1

Equipment List

Exhibit 2

System Specifications

Exhibit 3

Manufacturing Performance Standards and Specifications

Exhibit 4

Determination of Static Pressure Performance of the Healy Clean Air Separator

Exhibit 5

Vapor to Liquid Volume Ratio

Exhibit 6

Manufacturer Warranties

Exhibit 7

Nozzle Bag Test Procedure

Exhibit 8

Required Items in Conducting TP-201.3

Exhibit 9

Liquid Condensate Trap Compliance Test Procedure

Exhibit 10

This section left intentionally blank

Exhibit 11

This section left intentionally blank

Exhibit 12

Veeder-Root Maintenance Tracker (Optional)

Exhibit 13

Below-Grade Vaulted Tank Configuration

Exhibit 14

Dispenser Integrity Test

Exhibit 15

ARID Technologies AT-150 Permeator Compliance Test Procedure

For copies of the individual IOM and superseded versions, please contact vapor@arb.ca.gov.

Installation, Operation and Maintenance Manual (IOM)

Superseded Revisions

  • Superseded VR-201-AB (placeholder)
  • Superseded VR-201-AA
  • Superseded VR-201-Z
  • Superseded VR-201-Y
  • Superseded VR-201-X
  • Superseded VR-201-W
  • For copies of revisions A through V, please email vapor@arb.ca.gov 

March 18, 2015 Letter to Franklin Fueling Systems and Veyance Technologies requiring the use of EVR certified low permeation replacement hoses for Assist Phase II EVR systems.

Fillboard Nozzle Advertisement Product
August 1, 2012 letter to allow over media for Healy 900 nozzles.

New EasyGrip Reconnection Clamp
July 14, 2011 Letter to GA Ninety to use the EasyGrip reconnection clamp to reconnect the Healy 8701VV Breakaway

Modified Healy 795 Reconnection Clamp
June 22, 2011 Letter to Franklin Fueling Systems to implement design change to the Healy 795 Reconnection Clamp

ARB Letter
Franklin Fueling Systems Request for Spout Modification, New Spout Epoxy and Epoxy Curing Procedure.

900 EVR Nozzle and VP-1000 Design Modifications
January 23,2009 Letter to Franklin Fueling Systems to implement design changes to model 900 EVR nozzle and VP-1000 vacuum pump.

Clean Air Separator Paint Colors
August 2, 2007 letter clarifying that the Healy Clean Air Separator may be painted any color.

ARB Letter
Franklin Fueling Systems Request to Use New Vendor for Their Model 900 EVR Nozzle Casting.

Correspondence related to VR-201
April 29, 2005 letter to WSPA clarifying that the Healy Clean Air Separator is not an Aboveground Storage Tank under CA State Law.

VP-1000 Design Improvements
September 18, 2007 Letter to Franklin Fueling Systems to implement VP-1000 design improvements.