Standards Laboratory
Contacto
In support of California’s ambient air monitoring program, the California Air Resources Board (CARB) operates and maintains a Standards Laboratory to provide authoritative standards for determining whether data meets established data quality objectives. The Standards Laboratory provides metrological certification/verification services for the gases and equipment used to perform required quality assurance activities (i.e., calibrations, checks, and audits). The gases evaluated are contained in compressed gas cylinders and are typically single pollutant or multi-blends (CO, SO2, and NO). The equipment evaluated includes ozone transfer standards, flow measuring devices (i.e., orifices, mass flow meters, and mass flow controllers) and meteorological sensors (i.e., wind speed, temperature, pressure, and relative humidity). The Standards Laboratory has developed a Quality Assurance Manual that details the policies and procedures that ensure consistent collection and validation of the data generated by the Standards Laboratory. Standard Operating Procedures (SOP) for conducting certifications/verifications are currently under review and are being revised. If you would like to view a copy of the Quality Assurance Manual, or a Standards Laboratory SOP, please reach out to the Certification Services Contact at the bottom of the page.
If you would like to receive updates and important announcements regarding certification stations and primary reference standards, please click here to join the email list for the Standards Lab.
SOP Number | Standard Operating Procedure Title | Effective Date |
---|---|---|
5720-3 | Standard Operating Procedure for Verification of Ozone Transfer Standards Using a Standard Reference Photometer | 07/06/2022 |
003-3 | Standard Operating Procedure for Verification of Gaseous Calibration Standards | 09/27/2021 |
004-4 | Standard Operating Procedure for Verification of PM2.5 Working Standards | 08/22/2022 |
006-2 | Standard Operating Procedure for Verification of Temperature Devices | 11/02/2020 |
008-2 | Standard Operating Procedure for Verification of Anemometer Drives | 09/22/2020 |
002-1 | Standard Operating Procedure for Verification of High Flow Working Standards | 07/2014 |
007-2 | Standard Operating Procedure for Verification of Pressure Devices | 04/2015 |
005-2 | Standard Operating Procedure for Verification of Relative Humidity Devices | 03/2014 |
Additional Resources | Date |
---|---|
Technical Bulletin 1 - Ozone | 08/22/2022 |
Technical Bulletin 2 - PM2.5 | 08/22/2022 |
Calibration and Measurement Capabilities (CMC) | 09/12/2022 |
Quality Assurance Bulletins | Various |
Standards Lab Contact (email) |
---|
Monday through Thursday:
8:00am to 12:00pm & 1:00pm to 4:30pm
Shipping Address:
Attn: Standards Laboratory
CARB Monitoring Laboratory Division
1927 13th Street | Alley Entrance
Sacramento, CA 95811