SAN LUIS OBISPO COUNTY AIR POLLUTION CONTROL DISTRICT
RULE 601 - NEW SOURCE PERFORMANCE STANDARDS (NSPS)
(Adopted 6/8/81; Revised 2/23/88, 9/04/90, 1/24/96, and 5/28/97)
A. Incorporation of Federal Standards
The provisions of Part 60, Chapter I, Title 40 of the Code of Federal Regulations (40 CFR Part 60), which are in effect on May 28, 1997, are incorporated herein as part of the Rules and Regulations of the San Luis Obispo County Air Pollution Control District. Applicable provisions of 40 CFR Part 60 include those incorporated in the current bound CFR volume plus any provisions recently promulgated by EPA, as noticed in the Federal Register, but not yet incorporated into the bound CFR. Where there are currently effective provisions which are not yet included in the bound CFR volume, the Federal Register notice by which each provision was promulgated is referenced in the affected subpart of 601.D of this Rule.
B. Applicability
All new stationary sources of air pollution, and all modified or reconstructed stationary sources of air pollution shall comply with the standards, criteria, and requirements set forth herein. Whenever any source is subject to more than one rule, regulation, provision or requirement relating to the control of any air contaminant, the most stringent provision shall apply.
C. "Administrator" means "APCO"
For the purpose of this Rule, the word "Administrator" as used in 40 CFR Part 60 shall mean the Air Pollution Control Officer (APCO) of the District, except where the reference to "Administrator" relates to approval of alternate or equivalent test methods or alternative work practices/standards.
D. List of Incorporated CFR Provisions
The following table lists all 40 CFR Part 60 provisions which are incorporated in their entirety as part of
this Rule. Federal Register (FR) references are to currently effective provisions promulgated or revised by EPA,
but not yet incorporated into the currently available CFR volume. Notations in this list indicate deviations from
the EPA-promulgated provisions found in the CFR which have been adopted by the District Board for inclusion in
this Rule.
| CFR Subpart | Title |
| Subpart A | General Provisions |
| Subpart C | Emission Guidelines and Compliance Times |
| Subpart Ca | Emissions Guidelines and Compliance Times for Municipal Waste Combustors |
| Subpart Cb | Emissions Guidelines and Compliance Times for Municipal Waste Combustors That Are Constructed on or Before December 19, 1995 |
| Subpart Cc | Emissions Guidelines and Compliance Times for Municipal Solid Waste Landfills |
| Subpart Cd | Emissions Guidelines and Compliance Times for Sulfuric Acid Production Units |
| Subpart D | Standards of Performance of Fossil-Fuel-Fired Steam Generators for which Construction is Commenced after August 17, 1971 |
| Subpart Da | Standards of Performance for Electric Utility Steam Generating Units for which Construction is Commenced after September 18, 1978 |
| NOTE: The 30-day emissions averaging periods specified in the Federal Standard are replaced with 24-hour emissions averaging periods for affected facilities in the District. | |
| Subpart Db | Standards of Performance For Industrial-Commercial-Institutional Steam Generating Units |
| Note: The 30-day emissions averaging periods specified in the federal standard are replaced with 24-hour emissions averaging periods for affected facilities in the District | |
| Subpart Dc | Standards of Performance for Small Industrial-Commercial-Institutional Steam Generators |
| Note: The 30-day emissions averaging periods specified in the federal standard are replaced with 24-hour emissions averaging periods for affected facilities in the District | |
| Subpart E | Standards of Performance for Incinerators |
| Subpart Ea | Standards of Performance for Municipal Waste Combustors for which Construction is Commenced after December 20, 1989 and on or before September 20, 1994 |
| Subpart Eb | Standards of Performance for Municipal Waste Combustors for Which Construction is Commenced after September 20, 1994 |
| Subpart F | Standards of Performance for Portland Cement Plants |
| Subpart G | Standards of Performance for Nitric Acid Plants |
| Subpart H | Standards of Performance for Sulfuric Acid Plants |
| Subpart I | Standards of Performance for Hot Mix Asphalt Facilities |
| Subpart J | Standards of Performance for Petroleum Refineries |
| Subpart K | Standards of Performance for Storage Vessels for Petroleum Liquids for Which Construction, Reconstruction, or Modification Commenced After June 11, 1973, and Prior to May 19, 1978 |
| Subpart Ka | Standards of Performance for Storage Vessels for Petroleum Liquids for Which Construction, Reconstruction, or Modification Commenced After May 18, 1978, and Prior to July 23, 1984 |
| Subpart Kb | Standards of Performance for Volatile Organic Liquid Storage Vessels (Including Petroleum Liquid Storage Vessels) for Which Construction, Reconstruction or Modification Commenced After July 23, 1984 |
| Subpart L | Standards of Performance for Secondary Lead Smelters |
| Subpart M | Standards of Performance for Secondary Brass and Bronze Production Plants |
| Subpart N | Standards of Performance for Primary Emissions from Basic Oxygen Process Furnaces for Which Construction is Commenced after June 11, 1973. |
| Subpart Na | Standards of Performance for Secondary Emissions from Basic Oxygen Process Steelmaking Facilities for Which Construction is Commenced after January 20, 1983 |
| Subpart O | Standards of Performance for Sewage Treatment Plants |
| Subpart P | Standards of Performance for Primary Copper Smelters |
| Subpart Q | Standards of Performance for Primary Zinc Smelters |
| Subpart R | Standards of Performance for Primary Lead Smelters |
| Subpart S | Standards of Performance for Primary Aluminum Reduction Plants |
| Subpart T | Standards of Performance for the Phosphate Fertilizer Industry: Wet-Process Phosphoric Acid Plants |
| Subpart U | Standards of Performance for the Phosphate Fertilizer Industry: Superphosphoric Acid Plants |
| Subpart V | Standards of Performance for the Phosphate Fertilizer Industry: Diammonium Phosphate Plants |
| Subpart W | Standards of Performance for the Phosphate Fertilizer Industry: Triple Superphosphate Plants |
| Subpart X | Standards of Performance for the Phosphate Fertilizer Industry: Granular Triple Superphosphate Storage Facilities |
| Subpart Y | Standards of Performance for Coal Preparation Plants |
| Subpart Z | Standards of Performance for Ferroalloy Production Facilities |
| Subpart AA | Standards of Performance for Steel Plants: Electric Arc Furnaces Constructed after October 21, 1974, and on or Before August 17, 1983 |
| Subpart AAa | Standards of Performance for Steel Plants: Electric Arc Furnaces and Argon-Oxygen Decarburization Vessels Constructed After August 7, 1983 |
| Subpart BB | Standards of Performance for Kraft Pulp Mills |
| Subpart CC | Standards of Performance for Glass Manufacturing Plants |
| Subpart DD | Standards of Performance for Grain Elevators |
| Subpart EE | Standards of Performance for Surface Coating of Metal Furniture |
| NOTE: The 30-day emissions averaging periods specified in the Federal Standard are replaced with 24-hour emissions averaging periods for affected facilities in the District. | |
| Subpart GG | Standards of Performance for Stationary Gas Turbines |
| Subpart HH | Standards of Performance for Lime Manufacturing Plants |
| Subpart KK | Standards of Performance for Lead-Acid Battery Manufacturing Plants |
| Subpart LL | Standards of Performance for Metallic Mineral Processing Plants |
| Subpart MM | Standards of Performance for Automobile and Light-Duty Truck Surface Coating Operations |
| NOTE: The 30-day emissions averaging periods specified in the Federal Standard are replaced with 24-hour emissions averaging periods for affected facilities in the District. | |
| Subpart NN | Standards of Performance for Phosphate Rock Plants |
| Subpart PP | Standards of Performance for Ammonium Sulfate Manufacture |
| Subpart QQ | Standards of Performance for the Graphic Arts Industry: Publication Rotogravure Printing |
| NOTE: The 30-day emissions averaging periods specified in the Federal Standard are replaced with 24-hour emissions averaging periods for affected facilities in the District. | |
| Subpart RR | Standards of Performance for Pressure Sensitive Tape and Label Surface Coating Operations |
| NOTE: The 30-day emissions averaging periods specified in the Federal Standard are replaced with 24-hour emissions averaging periods for affected facilities in the District. | |
| Subpart SS | Standards of Performance for Industrial Surface Coating: Large Appliances |
| NOTE: The 30-day emissions averaging periods specified in the Federal Standard are replaced with 24-hour emissions averaging periods for affected facilities in the District. | |
| Subpart TT | Standards of Performance for Metal Coil Surface Coating |
| NOTE: The 30-day emissions averaging periods specified in the Federal Standard are replaced with 24-hour emissions averaging periods for affected facilities in the District. | |
| Subpart UU | Standards of Performance for Asphalt Processing and Asphalt Roofing Manufacture |
| Subpart VV | Standards of Performance for Asphalt Processing and Asphalt Roofing Manufacture |
| Subpart WW | Standards of Performance for the Beverage Can Surface Coating Industry |
| NOTE: The 30-day emissions averaging periods specified in the Federal Standard are replaced with 24-hour emissions averaging periods for affected facilities in the District. | |
| Subpart AAA | Standards of Performance for New Residential Wood Heaters |
| Subpart BBB | Standards of Performance for the Rubber Tire Manufacturing Industry |
| Subpart DDD | Standards of Performance for Volatile Organic Compound (VOC) Emissions from the Polymer Manufacturing Industry |
| Subpart FFF | Standards of Performance for Flexible Vinyl and Urethane Coating and Printing |
| NOTE: The 30-day emissions averaging periods specified in the Federal Standard are replaced with 24-hour emissions
averaging periods for affected facilities in the District. The monthly basis used to calculate the VOC content from the source performance test in the Federal Standard is replaced with a 24-hour period to demonstrate compliance on a daily basis for affected facilities in the District. |
|
| Subpart GGG | Standards of Performance for Equipment Leaks of VOC in Petroleum Refineries |
| Subpart HHH | Standards of Performance for Synthetic Fiber Production Facilities |
| NOTE: The six-month rolling average basis specified in the Federal Standard is replaced with 24-hour emission averaging periods for affected facilities in the District | |
| Subpart III | Standards of Performance for Volatile Organic Compound (VOC) Emissions From the Synthetic Organic Chemical Manufacturing Industry (SOCMI) Air Oxidation Unit Process |
| Subpart JJJ | Standards of Performance for Petroleum Dry Cleaners |
| Subpart KKK | Standards of Performance for Equipment Leaks of VOC From Onshore Natural Gas Processing Plants |
| Subpart LLL | Standards of Performance for Onshore Natural Gas Processing; SO2 Emissions |
| Subpart NNN | Standards of Performance for Volatile Organic Compound (VOC) Emissions From Synthetic Organic Chemical Manufacturing Industry (SOCMI) Distillation Operations |
| Subpart OOO | Standards of Performance for Nonmetallic Mineral Processing Plants |
| Subpart PPP | Standards of Performance for Wool Fiberglass Insulation Manufacturing Plants |
| Subpart QQQ | Standards of Performance for VOC Emissions from Petroleum Refinery Wastewater Systems |
| Subpart RRR | Standards of Performance for Volatile Organic Compound Emissions from Synthetic Organic Chemical Manufacturing Industry (SOCMI) Reactor Processes |
| Subpart SSS | Standards of Performance for Magnetic Tape Coating Facilities |
| Subpart TTT | Standards of Performance for Industrial Surface Coating: Surface Coating of Plastic Parts for Business Machines |
| Subpart UUU | Standards of Performance for Calciners and Dryers in Mineral Industries |
| Subpart VVV | Standards of Performance for Polymeric Coating of Supporting Substrates Facilities |
| Subpart WWW | Standards of Performance for Municipal Solid Waste Landfills |
|
Appendix A Appendix B Appendix D Appendix F Appendix I |
Test Methods Performance Specifications Required Emission Inventory Information Quality Assurance Procedures Removable Label and Owners Manual |